Steel bar cutting machines are quite common on construction sites. So, steel bar workers, do you really know how to use steel bar cutting machines? Have you really used the steel bar cutting machine well?
The traditional approach is to place the machine on a larger open space and place it on site. This will cause the cutting machine to sink to the ground after work. Some workers think of using bricks or wooden boards to nail a large board, more than ten meters long, on one side of the cutting machine. When cutting, it is used as a fixed length. Is this outdated and clumsy method too outdated? The biggest disadvantage is that the passage is separated, and due to the height of the cutting machine being generally below 60 centimeters, workers need to frequently sit on their waist while working, which can lead to easy fatigue. Causing a decrease in work efficiency.
The correct way to do it is to use thick steel pipes or channel steel to weld a bracket with thick steel bars or angle steel, which is about 30 centimeters high. Place it under the cutting machine, clamp the casters of the cutting machine, and raise the cutting machine to reduce fatigue strength. Additionally, make four to five iron plate stools with a volume of over 60 centimeters square. The stool surface is made of iron plates, and the four legs are welded with steel bars, which can be easily moved. Place the materials to be cut on both sides of the cutting machine, and draw cutting lines on the stool surface. Give it a try, the benefits are considerable.
At the same time, it is necessary to choose a spacious location for the homework as much as possible. When the site is narrow, the steel reinforcement work cannot be done. The semi-finished steel reinforcement is like a traditional Chinese medicine shop, and there must be a place to place it. If there is no place to place it, it will have to be pressed down. When it takes time, it will be difficult to turn it over quickly, and it is not cost-effective to delay work.
The correct use of a steel bar cutting machine not only improves production efficiency and facilitates operation, but also ensures that the end face of the steel bar is perpendicular to the axis of the steel bar, without any horseshoe or warping phenomenon, making it convenient for welding or mechanical connection of the steel bar. The cutting length of steel bars should strive for accuracy, with an allowable deviation of ± 10mm.
Wenzhou Jietuo Electromechanical Co., Ltd. is an enterprise specializing in the production and export of portable hydraulic electric steel bar quick disconnectors, steel bar cutting machines, steel bar bending machines, shear pliers and other tools. Our national consultation hotline is 13819758083. With many years of production experience, we bring you the best steel bar processing machinery products and high-quality services, making you feel at ease when using them.
